Replaces NMP
CAS 872-50-4
Synonyms N.Méthyl.2.Pyrrolidone
M Pyrol
1-Méthylazaccyclopentan-2-One
CLEANING SOLVENT
PE AND PU RESINS, EPOXIES, BIS-GMA
NOT CLASSIFIED FLAMMABLE
STRONG DECANTING POWER
Recoverable Reusable
RECYCLABLE BY DISTILLATION
LOW STEAM PRESSURE
Reduces consumption
DESCRIPTION
INFINITY was developed as part of the removal of CMR solvents. It is also part of the plan to reduce warning diagrams for improved health, environmental and fire safety. Low odour, low evaporation loss, high dissolving power of polymers, co-polymers and composites organic matrix composites.
FIELDS OF USE
INFINITY is a solvent, dissolvent, powerful stripping agent for varnishes, solvent-base paints.
It is an excellent cleaning agent for dissolving and descaling residues in combustion engines.
INFINITY instantly dilutes fresh foamed polyurethane foams. It also eliminates polymerised PU foams, flexible or rigid, by simple contact, then wiping, or with water under high
pressure.
TYPICAL PHYSICO-CHEMICAL CHARACTERISTICS
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Aspect |
Visual |
Fluid |
- |
|
Colour |
Visual |
Colourless |
- |
|
Odour |
Olfactory |
Odourless |
- |
|
Density at 25°C |
NF EN ISO 12185 |
1110 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4300 |
- |
|
Freezing point |
ISO 3016 |
-40 |
°C |
|
Distillation range |
ISO 3405 |
190-230 |
°C |
|
Vacuum distillation |
- |
190 |
°C |
|
Solubility in water |
- |
Partial |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.5 |
mm²/s |
|
Acid number |
EN 14104 |
0 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
<0.01 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
% |
|
Vapor pressure at 20°C |
NF T 13016-1 |
0,4 |
hPa |
|
PERFORMANCE CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
KB Index |
ASTM D 1133 |
nm |
- |
|
Evaporation rate |
|
>6 |
H |
|
Surface tension at 20°C |
ISO 6295 |
35.5 |
Dyne/ cm |
|
Breakdown voltage |
IEC 156 |
nm |
Volts |
|
Copper blade corrosion 100hrs at 40°C |
ISO 2160 |
1a |
Rating |
|
FIRE SAFETY CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Flash point (vacuum) |
ISO 2719 |
95 |
°C |
|
Self-ignition point |
ASTM E 659 |
> 250 |
°C |
|
Lower explosive limit |
NF EN 1839 |
0.9 |
% (volume) |
|
Upper explosive limit |
NF EN 1839 |
8.7 |
% (volume) |
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances |
CLP Regulation |
0 |
% |
|
TOXICOLOGICAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Anisidine index |
NF ISO 6885 |
nm |
- |
|
Peroxide index |
NF ISO 3960 |
nm |
meq(O2)/kg |
|
TOTOX (anisidine index + 2x peroxide index) |
- |
nm |
- |
|
Content of CMR substances, irritating, corrosive |
CLP Regulation |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
% |
|
Emissions of hazardous compounds, CMR, irritants, corrosive at 160°C. |
GC-MS |
0 |
% |
|
ENVIRONMENTAL CHARACTERISTICS |
|||
|
CHARACTERISTICS |
STANDARDS |
VALUES |
UNITS |
|
Biodegradation |
OECD 301 A OECD 301 C (MITI) |
> 70 > 70 |
% % |
|
VOC Content (Organo-Volatile Compounds) |
- |
<50 |
% |
|
Sulphur content |
GC MS |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
% |
|
Total halogen content |
GC MS |
0 |
% |
|
Chlorinated solvents content |
- |
0 |
|
|
Aromatic solvents content |
- |
0 |
|
|
Environmentally dangerous substance content |
CLP Regulation |
0 |
% |
|
PRP compound content |
- |
0 |
% |
|
ODP compound content |
- |
0 |
% |
PRESENTATIONS
IBC GRV 1000 kg Drum 200 kg Container 20 kg
INSTRUCTIONS FOR USE
It is used directly in pure form, by wiping with a cloth or immersion bath, cold.
Substrate cleaning speeds can be accelerated in hot baths up to 70°C.
MODES OF USE
 |
|
| Degreasing cloths | Ultrasonic tanks |
 |
|
| Degreasing solvent by fountain system | Baths for immersion in hot or cold substances |
Looking for another product?
|
Discover our entire range by clicking on the photo |
.jpg)
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 